Specially formulated polish for marble and terrazzo floors. Use Enhances the appearance and prolongs the life of marble and terrazzo floors. Non-yellowing cross linked polymer film. Does not discolour even the lightest floor. Produces a deep shine with excellent slip resistance. Responds brilliantly to all spray burnishing techniques. Directions Apply to a clean grease free floor. Strip old polish with F32 Selate, then rinse thoroughly with clean water. Allow the floor to dry. Application Apply a thin even film with a lint free mop or applicator. Best results will be achieved by when 2 thin coats are applied, one after the other once the first is dry. Initial drying time should be 30mins, speeding this up by heating the room will prevent the polish developing its maximum wear characteristics. Maintenance Do not spray burnish for at least 24hours after first laying the polish. Spray Cleaning/burnishing: As required though a daily routine will increase the life expectancy (See B10 or B12) Solids 18% Coverage 60 square metres per litre Dilution Use Neat. In very low humidity it is sensible to add up to 25% water to allow the full drying time Technical Specification Composition: A blend of acrylic copolymers, resins and copolymer wax incorporating wetting agents and film forming aids in a stable water based emulsion form incorporating metal cross linking additives. Appearance: Translucent emulsion Colour: Cream pH: 8.2 Solids: 18% Odour: Characteristic slightly sweet Shelf life: Two years minimum in unopened containers at ambient temperature. Freeze thaw stability: 3 cycles Coefficient of Friction To ASTM D204477-82
